Effect of Surface Preparation on Mechanical Properties of Anodized A6061 in Sulfuric Acid Bath

Authors

  • Amane Sahli Nuclear Research Center of Draria (CRND), Draria, Algiers
  • Oussama Djema Research Centre in Semiconductors Technology for Energetics (CRTSE), Algiers
  • Mabrouk Bouabdallah Ecole Nationale Polytechnique
  • Djaffar Saidi Nuclear Research Center of Draria CRND, Draria, Algiers

DOI:

https://doi.org/10.53907/enpesj.v2i1.93

Keywords:

A6061 aluminum alloy, Sulfuric anodizing, Microstructure, Surface morphology, Surface roughness, Microhardness, Tensile strength

Abstract

The aims of this work are to examine the effect of the pickling conditions on the mechanical behavior of anodized A6061. Pickling was explored at 60°C for 30, 60, 90 and 120 second. The growth rate of the anodic layer, surface roughness, microhardness and tensile strength of anodized samples treated by alkaline pickling were investigated. The experimental results showed that the thickness of the anodic layer is directly related to the roughness of the substrate. In addition an important growth in thickness layer affects slightly the mechanical proprieties.

Downloads

Published

2022-07-29